Building Materials

Anchor is a 2-component chemical anchor based on styrene-free vinylester resins in a standard cartridge, sprayable with a Tec Gun. The mixing of the two components is achieved by using static mixing tips. The unique combination of quick hardening, wide application margins and physical properties make it a unique chemical anchor in the professional market for effective fixing and assembly in all building materials, such as concrete, solid and hollow brick, aerated concrete,... . Anchor resists high forces and can be used on wet surfaces, even under water, at temperatures from -5°C to +40°C. After rapid curing, Anchor is stronger than the substrate: without shrinkage, therefore reliable, and without expansion, therefore low-stress. Safe, environmentally friendly and user-friendly. Can also be used indoors: styrene-free, phthalate-free, low odour. Thanks to its exceptionally high UV and chemical resistance, even against chlorinated and salt water, Anchor can be used in aggressive environments. Anchor is dimensionally stable and can also be used overhead in holes in the ceiling. Very long shelf life, even when opened and used. anchor-01.jpg anchor-01.jpg anchor-04.jpg anchor-07.jpg anchor-09.jpg anchor-10.jpg anchor-12.jpg anchor-13.jpg anchor-14.jpg screenreader.slider previousscreenreader.slider next

Pothole Filler Cold Tarmac – 25 kg Repair & Fix Potholes in Roads, Car Parks and Pavements easily and allow traffic to pass instantly. Our Pothole Filler is a cold lay asphalt concrete pot hole repair compound. It is simple to use on roads, car parks, pavements, drives and paths. No water or mixing required. You can use this in wet, freezing and hot conditions and traffic can drive over instantly. This Pothole Repair solution is compatible with flexible road surfaces. It is solvent-free and offers high skid resistance. There is zero waste. It is a specifically designed solution for roads, pavements and car parks. The product can be trafficked instantly and is compatible with the existing road surface. Can be applied at depths of up to 100mm. Contains bitumen. Approx coverage 1m² compacted.

Creates smooth layer for laying tiles or installing underfloor heating etc Can be used in wet rooms / bathrooms etc Ideal for renovating walls Ideal for Trades people and for DIY

Product Application Kilsaran KPRO Crete Rapid Setting Concrete is a fine concrete mix suitable for use in all general concrete work, both internally and externally where rapid setting and rapid strength development are required. Our Rapid Setting concrete is ideal for; • Repair to footpaths, driveways, patios etc. • Installation of ironwork and street furniture • Haunching for paving and kerbing • Post, sign and fence erection • General concrete work where fast setting and rapid strength development are required.

Gyproc ProMix Finish is a lightweight, ready-to-use, air-drying, ready-mixed filler. Benefits Suitable for all stages of the jointing process Can be used either by hand or with mechanical jointing tools Extremely good workability for easy application Very low shrinkage Easy to sand to an excellent finish