Plaster and Plasterboard

All Purpose Ready Mix Joint Compound is designed for taping, to finish joints and cornerbead, spot fasteners, skim and texture and repair cracks in plastered walls. Can also be used to texture surfaces and to laminate gypsum board to other surfaces such as masonry or other gypsum board. It contains sufficient binder to secure the reinforcing tape and develops its strength and hardness by drying. ADVANTAGES • Applies easily and provides excellent bond. • Stays strong – highly durable surface. • Lessens pocking and pinholing • Works great for first phases of finishing.

Lafarge decorative accessories are used to enhance walls and ceilings, and to relieve flat runs of lining, joints and angles Easy to cut and joint corners Less liable to handling damage than decorative coves Hides cracks between wall and ceiling edges

Creates smooth layer for laying tiles or installing underfloor heating etc Can be used in wet rooms / bathrooms etc Ideal for renovating walls Ideal for Trades people and for DIY

Siniat Joint Filler is a gypsum based joint compound designed for stage 1 of the taping and jointing process, bedding and filling plasterboard joints. Benefits: High quality professional joint filler for bedding and filling Easy mixing Low shrinkage Consistent setting time Also suitable for bedding corner protection For stage 1 of the taping and jointing process

Gtec Universal Bonding Compound. Gypsum based compound for direct bonding plasterboard to walls or bonding GTEC Metal Furring Wall Channels to walls. BENEFITS Bonds to the majority of masonry substrates Easy to mix and apply Dabs are quickly applied and allows adjustment during boarding Capable of accommodating nominal background irregularities Can accommodate shallow service runs 10-25mm Supplied in 25kg bags

Gyproc ProMix Finish is a lightweight, ready-to-use, air-drying, ready-mixed filler. Benefits Suitable for all stages of the jointing process Can be used either by hand or with mechanical jointing tools Extremely good workability for easy application Very low shrinkage Easy to sand to an excellent finish

TOUPRET Finish Filler is an easy to sand, ready-mixed filler for plasterboard finishing. It has an excellent finish and smooth application, and can be applied manually or with an airless spray machine. It can be applied to gypsum, old painted surfaces, cement, concrete, cellular concretend any type of butted or tapered plasterboard. There is no need to prime or seal the surface before application.Suitable for interior use. Overcoat with any filler, conventional paints and wall coverings.Conforms to BS EN 13963 for jointing applications. Code FGLIP20GB Surface condition Interior Task Jointing plasterboard Application method Manual Time between coats Second coat as soon as the filler is hard and dry to the touch. Surfaces Gypsum, old painted surfaces, cement, concrete, cellular concret and any type of butted or tapered plasterboard. Overcoat with Any type of filler, paint or wall coating. Maximum recommended application thickness Up to 5 mm. Mixing rate Ready to Use. Ready to paint time 12 to 24 Hours. Working time No limit. Application tools Putty knife. Blade. Trowel. Recommended temperature and humidity for application Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%. Adhesion Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa. Coverage g/m² (at 1mm thickness) 1700.00 IAQ (Indoor Air Quality) classification / Colour when dry White. Guarantee Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost. Clean tools with Water. Pack sizes Bucket 20 KG

EVO-STIK Plasterboard adhesive is a Gun Applied foam developed to bond Plasterboard to most common substrates such as Stone, Concrete, Brick, Metal and Wood. The foam cures under the influence of humidity in the air and substrate. It has excellent thermal and acoustic insulation properties. Excellent adhesion to Expanded Polystyrene, Plasterboards, Insulation Boards Quick and easy to apply with minimal mess or waste Replaces Heavy dry wall adhesive Gun Applied for faster application with less waste Coverage: 25 – 30 litres approx. per 750ml. The coverage yields are the maximum expected if the product is allowed to freely expand. These yields do not include wastage, which can be considerable, depending upon the manner used.